GuardForce® 358 Mesh Fencing

Find your fence

 
People accessing certain areas can jeopardise a life or an enterprise. Choose our GuardForce® intruder resistant fence system for a seriously secure and long lasting perimeter security solution.

PRODUCT OUTLINE

GuardForce® is our proprietary 358 welded mesh fence system. It has been principally designed to prevent unauthorised access to high hazard or value assets, such as rail corridors and airports. The standard arrangement is a 2400mm high sheet secured with tamper resistant fixings to specially designed posts and top and bottom rails. 358 mesh denotes vertical wires resistance welded at 3 inch (75mm) centres, horizontal wires at 0.5 inch (12.5mm) centres using a 8 gauge (Ø4mm) wire. The tight wire spacing makes the panel very hard to climb without the aid of tools and time consuming to cut.

At the same time the mesh maintains a high level of surveillance through the fence to assist detection and recording of intruders. All steel work is hot dip galvanised after fabrication and the wire of the mesh panel has a zinc alloy finish making the assembly highly corrosion resistant. See also our higher security GuardForce Max® welded mesh system. The fencing is combined with our range of Eternity® gate hinges and Bolt’nLock® locking hardware for an integrated solution.

BENEFITS

The benefits of GuardForce® fencing to the asset owner include:

  • Reduced financial loss due to theft, damage and vandalism.
  • Peace of mind that the duty of care to protect people from extreme hazards has been met.
  • Long run prevention of actual harm or serious injury.
  • Modular design that is safer and easier to install.
  • Time and cost saving by way of reduced maintenance costs and extended product life.

BRIEF PRODUCT VIDEO

Product Features

  • 2400mm high mesh sheet standard
  • Finger-proof, anti-climb mesh sheet
  • RazorTop® option for razor barb or serrated rail topping
  • Vandal resistant fixings and locking hardware
  • Compliant with national guidelines for electrical substations
  • Certified to withstand loadings per Australian Standards
See all details

Product Details

• Standard panel height: 2400mm and 3000mm
• Standard post centres (nominal): 2400mm
• Horizontal wires Ø4mm drawn wire – Galfan Zinc Aluminium wire. Other proprietary names for Galfan include Bezinal (Baekart) and Zalcote (OneSteel).
• Vertical wires Ø4mm drawn wire - Galfan
• Wire Tensile strength 500-550 MPa (Complies with AS 2423 with a tensile strength of 500/ 625MPa)
• Welded to minimum 60-80% of wire tensile strength
• Zinc coating mass of 255g/m2 minimum (Complies with AS 4534 Class W10Z5A)
• Manufactured to EN 10223-4:1998 Steel Wire and wire products for fences – Part 4. Steel wire welded mesh fencing & BS 1722-14:2006 Part 14: Specification for open mesh steel panel
• Steelwork: Hot dip galvanised after fabrication to AS 4680-2006 Hot-dip galvanized - zinc - coatings on fabricated ferrous articles

Please Download Product Brochure for GuardForce® 358 Mesh Fencing in pdf file format

• Straight barb extension to suit 5 strands of lean barbed wire and overlapping Ø550 loops of short blade razor barb.
• Canted barb extension to suit 5 strands of lean barbed wire and overlapping Ø550 loops of short blade razor barb.
• Concertina barb in self-support Ø550 loops of short blade razor barb that fix to the top rail of the fence.
• Serrated rail in a 50mm high profile that fixes to the top rail.

• For low to medium duty applications we recommend single and double gates made with 65x65x2.5mm stiles and rails to a maximum leaf width of 3000mm.
• For higher duty applications we recommend a single gate made with 65x65x2.5mm stiles and rails, and double gates from 75x75x3mm stiles and rails. For gate leaves greater than 2400mm we supply a modular two piece modular arrangement for manual handling and freight reasons up a maximum leaf width of 4000mm.

• For low to medium duty applications we recommend a ball bearing hinge that is secured to the gate stile and gate post with a combination of M8 bolts and 14g self-drilling tek screws.
• For higher duty applications we recommend one of our Eternity® hinges that combine a sealed bearing hinge at the top and a greasable tapered roller bearing at the bottom. These hinges have a much higher capacity in terms of the weight and length of the gate and will give years of trouble free service. The top hinge can be adjusted to raise or lower the level of the gate leaf. The assembly consists of a post bracket that is screwed to the gate post with four M10 stainless steel fasteners and a bracket that inserts into the gate stile.
• For self-closing gate applications we recommend a hydraulic self closing hinge. This unit has adjustable tension and screws the gate stile and gate post on site with a series of 14g self-drilling tek screws.

• For low to medium duty applications for a gate opening up to 5800mm we recommend a modular track sliding gates made with 75x75x3mm stiles and rails. These units are supplied with all the necessary hardware for manual operation and are readily assembled on site.
• For higher duty applications for a gate opening up to 8500mm we recommend our modular track sliding gate made with 100x100 stiles and rails. These units are supplied with all the necessary hardware for manual operation and are readily assembled on site.

• For basic and medium security applications we recommend our Bolt’nLock® Ø20mm slide bolt and Ø16mm drop bolt combination. These units are easily fitted on site and suit a standard padlock.
• For higher security applications we recommend our Bolt’nLock® Ø30mm stainless steel slide bolt and Ø20mm drop bolt combination. These units are welded to the gate frame during fabrication..
• Anti-climb hand hole that protects the internal locking hardware from attack but does not create a climb point.
• Dead-latch with panic lever for personnel access gates to be used in case of emergency.

• Hot dip galvanised after fabrication that will give a highly corrosion resistant finish to the fence.
• Polyester powder coat that will give a tough and long lasting colored finish to the fence.

 

PRODUCT ENQUIRY

Call us on 1800 887 887 or use the form below.